Taylor problem 5.2#

last revised: 14-Jan-2019 by Dick Furnstahl [furnstahl.1@osu.edu]

The potential energy for two atoms in a molecule can sometimes be approximated by the Morse function

\(\begin{align} U(r) = A\left[ \left(e^{(R-r)/S} -1\right)^2 -1 \right] \end{align}\)

for \(0 < r < \infty\) with \(A\), \(R\), and \(S\) all positive constants and \(S \ll R\).

The goals are to find the equilibrium position \(r_0\) and then the frequency of small oscillations.

Take the derivative and solve for the equilibrium \(r_0\):

\(\begin{align} \frac{dU}{dr} = 2A\left(e^{(R-r)/S} -1\right)\times e^{(R-r)/S} \times \frac{-1}{S} = 0 \quad\Longrightarrow\quad r_0 = R \quad\Longrightarrow\quad U(r_0) = -A \end{align}\)

Expand around \(r = r_0\) up to \((r - r_0)^2\) to find the small angle approximation equation and frequency:

\(\begin{align} U_{sa}(r) = A + \frac{A}{S^2} (r - r_0)^2 \quad\Longrightarrow\quad k = \frac{2 A}{S^2} \quad\Longrightarrow\quad \omega = \sqrt{k/m} = \sqrt{\frac{2 A}{ m S^2}} \end{align}\)

Make a plot to check \(r_0\)#

%matplotlib notebook   
# Use notebook rather than inline so plot remains active between
#  cells and so we can zoom in.

import numpy as np

import matplotlib.pyplot as plt

def U_pot(r, S=0.1, big_R=1, A=1):
    """Potential from Taylor problem 5.13."""
    return A * ( (np.exp((big_R - r)/S) - 1.)**2 - 1. )

def U_pot_min(S=0.1, big_R=1, A=1):
    """Returns the value of r at the minimum of U(r) and the value of
       U(r) at that point."""
    return big_R,  -A

def U_pot_sa(r, S=0.1, big_R=1, A=1):
    """Plot the potential in the small angle approximation"""
    r0 = big_R
    return  -A + A * (r - r0)**2 / S**2 

r_pts = np.arange(0.01, 6., .001)
U_pot_1 = U_pot(r_pts, S=0.2)
U_pot_2 = U_pot(r_pts, S=0.5)
#U_pot_3 = U_pot(r_pts, S=0.3)

fig = plt.figure(figsize=(4,4))
ax = fig.add_subplot(1,1,1)
ax.plot(r_pts, U_pot_1, label=r'$S=0.2$', color='blue')
ax.plot(r_pts, U_pot_2, label=r'$S=0.5$', color='red')
#ax.plot(r_pts, U_pot_3, label=r'$S=0.3$', color='green')

ax.set_xlim(0.,2.5)
ax.set_ylim(-2.,5.)

x0, y0 = U_pot_min(S=0.2)
ax.scatter(x0, y0, color='blue')
x0, y0 = U_pot_min(S=0.5)
ax.scatter(x0, y0, color='red')
#x0, y0 = U_pot_min(S=0.3)
#ax.scatter(x0, y0, color='green')

ax.set_xlabel('r')
ax.set_ylabel('U(r)')

ax.legend()
fig.tight_layout()

Now put in small angle potentials (note that this changes the figure above, which is still the active figure (because we are using %matplotlib notebook). Use the controls to zoom in to verify that the small-angle approximated \(U(r)\) really does agree for \(r\) close enough to the minimum.

# "sa" here stands for "small-angle".
U_pot_sa_1 = U_pot_sa(r_pts, S=0.2)
U_pot_sa_2 = U_pot_sa(r_pts, S=0.5)
#U_pot_sa_3 = U_pot_sa(r_pts, S=0.3)
ax.plot(r_pts, U_pot_sa_1, color='blue', ls='--')
ax.plot(r_pts, U_pot_sa_2, color='red', ls='--')
#ax.plot(r_pts, U_pot_sa_3, color='green', ls='--')

[<matplotlib.lines.Line2D at 0x121585240>]

Can we solve for exact and small angle oscillations numerically?

Theoretical and computational mechanics

Taylor problem 5.2

Contents

Taylor problem 5.2#

Make a plot to check \(r_0\)#